Bull Bar Isuzu MUX 2017 - 2020

Key Advantages

1) Full Bumper Replacement
2) 1 Piece Fully Welded Design
3) Low Profile 120mm From Badge To Front Of Bar
4) Extremely Low Weight- 34kg Bullbar, 16kg Winch Cradle & 10Kg Bash Plate.

Included winch cradle – can suit up to 11,000lb low mount winch

• Made From 8mm Steel Main Winch Cradle & 3mm Side Wings Reinforced
• ADR69 Compliant And Airbag Compatible
• Meets AS4876.1 2002
• Suits Most Low Mount Winches Upto 12,000LB
• Rated Tow Points(3500-4000 Kg Each Tested) Recommended Use With Bridal And Winch Only. Snatch Strap Can Exceed 8T Total That Is Why Recommended As A Tow Point Fits With Aftermarket Dedicated Recovery Points Such As Roadsafe.
• Powder Coated In Texture Black Or Can Be Colour Matched(Additional Cost)
• Bash Plate Back To Front Diff Included
• Fits Factory Fog Lights
• Loop Does Not Protrude Past The Front Of The Bar
• Can Suit 9inch LED Spot Lights Or LED Bars.
• 2x Spot Light Mounting Points Are Located On The Loop Bar.
• The Bar Can Be Adjusted Approx 20mm From The Fender Or Can Be Adjusted To Sit Flush.
• Its A Complete Bumper Replacement Making Install Time Frame 2.5-4Hr
• Install Difficulty = Medium (Some Trimming Required)

The MUX bull bar weighs approximately 60kg, on average you can expect to remove 15-20kg of plastics and brackets from the front of the Isuzu 4wd giving you a Net increase of roughly 40kg.

Other accessories like Bash plates, Lights, winches and recovery points will also add weight and should be taken into account.

NB: Kindly be aware that we can ship this product exclusively to a commercial address. If a residential address is provided, we will reach out to request a commercial address. Alternatively, we can arrange for delivery to the nearest depot upon your preference.